PAVO Vital Sign Monitor

www.axcentmedical.com

Features

• 8” color TFT LCD Screen (touch screen optional)

• Portable, lightweight and sturdy design

• Flexible parameters configuration for different clinical environments

• Rechargeable Li-ion Battery (up to 12 hours uninterruptable work)

• Big font and font color display setting

• Spot-check and continuous monitoring mode

• Selectable for Adult, Pediatric and Neonatal patients

• Wired/Wireless CMS, support HL7 protocol to HIS

• Barcode scanner support • Thermal recorder support

• Graphical & tabular trend review

• 48 hours holographic wave review for each patient (stored in SD card)
Display

8” color TFT LCD Screen, resolution: 800 x 600

ECG Lead type 3-lead: I, II, III--5-lead: I, II, III, aVR, aVL, aVF, V

Display sensitivity:

2.5 mm/mV (×0.25), 5 mm/mV (×0.5),10 mm/mV (×1.0), 20 mm/mV (×2.0)

Wave sweep speed: 6.25 mm/s, 12.5 mm/s,

25 mm/s, 50 mm/s

Bandwidth

Diagnostic mode: 0.05Hz~100Hz

Monitor mode: 0.5Hz~40Hz

Surgery mode: 1Hz~20Hz

Strong filter mode: 5Hz~20Hz CMRR

>100dB

Notch: 50/60 Hz notch filter can be set to on or off

Differential input impedance >5 MΩ

Electrode polarization voltage range: ±400 mV

Baseline recovery time <3 s after defibrillation (in monitor and surgery mode)

Calibration signal: 1 mV (peak - peak),

accuracy ±3%

RESP

Measurement method: Thoracic electrical

bioimpedance

Rate: 0 – 150 bpm

Measuring lead: Lead I, II

Wave gain: ×0.25, ×0.5, ×1, ×2

Respiratory impedance range: 0.5-5 Ω

Baseline impedance: 500-4000 Ω

Gain: 10 grades

Scan speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s

TEMP

Measurement method: Thermistor

Measuring range: 5~50 °C (41~122 °F)

Resolution: 0.1 °C

Measurement accuracy: ±0.1 °C

Recorder (optional)

Built-in, Thermal dot array

Horizontal resolution: 16 dots/mm (25 mm/spaper speed)

Vertical resolution: 8 dots/mm

Paper speed: 25 mm/s, 50 mm/s

Number of waveform channels: 3